| Price | RM3,350.00 |
| Product SKU | PEAVEY_VSX48E |
| Brand | PEAVEY |
| Size (L x W x H) | 53 cm x 34 cm x 12 cm |
| Availability | In Stock |
| Shipping Fee |
Malaysia
Starting from RM9.76
|
| Quantity |
|
DSP Management System (4 In X 8 Out)
OVERVIEW:
The VSXe processors are DSP-based, loudspeaker management systems that boast a 96kHz sample rate and a floating point DSP processor for quiet accurate filter response. The crossover filters are fully adjustable and any input can be routed to any output. The VSX® Editor Program for PC allows complete remote setup and operation via the front panel USB port or by the rear panel Ethernet network connection. Files can also be saved and loaded using this interface software.
FEATURES:
* Every input features gain, mute, high- and low-pass filters, 8-band parametric EQ, polarity, and up to 680 ms of delay
* Every output features gain, mute, crossover/band-pass filters, 9-band parametric EQ, polarity, up to 680 ms of delay, and a compressor/limiter
* Built-in signal generator offers sine, white noise, and pink noise
* Route any input to any output
* Channels can be linked for simplified stereo operation
* EQ filter types include: PEQ, Low-Shelf, Hi-Shelf, Low-Pass, High-Pass, All-Pass1, and All-Pass2
* Crossover/band-pass filters feature Butterworth, Bessel, or Linkwitz-Riley alignments from 1st-order (6 dB/octave) to 8th-order (48 dB/octave)
* 5-segment LED meters for each input and output
* Remote control via USB or Ethernet
* Selectable security lock prevents unauthorized access
SPECIFICATIONS:
* Rack height: 1 RU
* Frequency response: 10 Hz to 21 kHz (+0/-0.5 dB), 10 Hz to 32 kHz (+0/-1 dB)
* Dynamic range: >107 dB unweighted, >109 dB A-weighted
* Inputs: 4 x XLR 3-pin female
* Outputs: 8 x XLR 3-pin male
* Input impedance: 20kohms
* Output impedance: 100 ohms
* Maximum input level: +20 dBu
* Maximum output level: +20dBu
* Sample rate: 96kHz
* THD+N: 0.007% @ 1 kHz
* Noise floor: -87 dBu unweighted (22 Hz to 22 kHz), -89 dB A-weighted (22 Hz to 22 kHz)
* Latency: 3.5 ms (analog input to analog output)
* Ethernet interface: 10 Mbps Static IPv4 address
* Baud Rate: 115200, Data Bits: 8, Parity: None, Stop Bits: 1, RS-232 Rx: Pin 2, RS-232 Tx: Pin 3, RS-232 Gnd: Pin 5, RS-485 +: Pin 7, RS-485 -: Pin 8
* Power requirement: 195 to 240 VAC, 50/60Hz
* Power consumption: 15W
* Fuse: F2AL250V
* Dimensions: 49cm x 21cm x 5cm
* Weight: 2.4kg
PACKAGING:
* Packaging size: 53cm x 34cm x 12cm
* Packaging weight: 3.9kg
